<What is Panasonic Multi-Function Station?>

Multi-Function Station software provides you data communication
software that lets you exchange data files with Panasonic 
KX-FLM551/FLB751 series.
Remote control provides an improved user interface, which allows
you to configure setup items and advanced features with your PC.
In fact, you can perform data transactions quickly and easily,
just by pointing and clicking your mouse!


<Hardware Requirements for Multi-Function Station>

To use Multi-Function Station, the following hardware is
required.

Basic Software
:Microsoft(R) Windows(R) 95/98/Me/2000/XP x86(32bit), Windows NT(R) 4.0 and Windows Vista(TM) x86(32bit)

CPU
:Windows 95/98
  Pentium(R) 90MHz or higher processor
:Windows Me
  Pentium 150MHz or higher processor
:Windows NT4.0
  Pentium 133MHz or higher processor
:Windows 2000
  Pentium 166MHz or higher processor
:Windows XP
  Pentium 300MHz or higher processor
:Windows Vista 
  Pentium 800MHz or higher processor

Memory Minimum  
:Windows 95/98
  24MB (32MB or more is recommended)
:Windows Me
  32MB (64MB or more is recommended)
:Windows NT4.0
  24MB (32MB or more is recommended)
:Windows 2000
  64MB
:Windows XP
  128MB
:Windows Vista        
  512MB

Hard disk
:More than 40MB available space

Other
:USB cable or parallel(IEEE1284) cable
:CD-ROM drive
:Panasonic KX-FLM551/FLB751 series

*Windows 95/NT4.0 does not offer USB port.
*Windows Vista does not offer parallel port.


<Installing Multi-Function Station>

1.Set the connection type (parallel or USB) by using the fax
  machine according to the cable type you use (feature #15).
2.Connect your PC to the fax machine with a cable (USB or
  parallel).
3.Start Windows 95/98/Me/NT4.0/2000/XP/Vista and close all applications.
  Add New Hardware Wizard dialog box will appear.
  Click Cancel to close it. 
4.Insert the included CD-ROM into your CD-ROM drive.
  An installation dialog box should be displayed automatically.
  If it is not displayed, please follow instructions.
  Click Start button, choose Run.
  Type "d:\setup".
  (where "d" is the drive letter of your CD-ROM drive)
  Click OK button.
5.Follow the instructions on the screen until all files have
  been installed.

*Readiris OCR software can also be installed.
*If the fax machine is not connected to your computer,
 the Port Selection dialog box will appear.
 Select the port number which you want to use.
 If the fax machine is connected to your computer,
 the port number will be automatically detected.
*If you use an USB cable with Windows XP, a caution message
 "The software you are installing for this hardware has not passed Windows
  Logo testing to verify its compatibility with Windows XP"
 may appear, but you can continue the installation with no problem.

Note: You must be logged in as an Administrator when you use Windows NT4.0/2000/XP/Vista.


<Uninstalling Multi-Function Station>

1.Click the Start button.
2.Point to Settings, then click Control Panel.
3.Double-click the Add/Remove Programs icon.
4.Select "Panasonic Multi-Function Station" from the list.
5.Click the Add/Remove button, then follow the instructions on
  the screen.


Trademarks
*Microsoft, Windows, Windows NT and Windows Vista are either registered trademarks or
 trademarks of Microsoft Corporation in the United States and/or
 other countries.
*Pentium is a registered trademark or trademark of Intel
 Corporation in the United States and/or other countries.
